Huzhou Fulihua Printer Ribbon Co., Ltd
QUALITY INSPECTION
3 ITEMS INSPECTIO
- NYLON RIBBON INSPECTION
- ABS CARTRIDGE INSPECTION
- FINISHED RIBBON INSPECTION
NYLON RIBBON ROLL INSPECTION
INKED NYLON RIBBON ROLL
TEST REPORT UNINKED NYLON RIBBON
| TEST ITEM | 4040A | 4040B | 4040A | 4040B | 4070A | 4070B |
| H/D | H/D | N/D | N/D | N/D | N/D | |
| Width（mm） | 12.7~12.8 | 12.68～12.8 | 12.7~12.8 | 12.7~12.8 | 12.7~12.8 | 12.7~12.8 |
| Thickness（mm） | 0.118 | 0.118 | 0.97 | 0.97 | 0.126 | 0.125 |
| Warp yarn（Thread/CM） | 83 | 83 | 69 | 69 | 69 | 69 |
| Weft yarn（Thread/CM） | 47 | 47 | 44 | 44 | 44 | 44 |
| Density（Thread/C㎡） | 130 | 130 | 113 | 113 | 113 | 113 |
| Appearance | OK | ok | 0k | K | OK | OK |
| Tensile Strength of edge(gf) | 15~22 | 15～20 | 15~21 | 15~22 | 16~24 | 15~23 |
| Oleic ink climb(mm) | 16.7 | 15.8 | 18.8 | 18.2 | 17.9 | 17.5 |
| Ink Absorption | 20.1% | 20.30% | 19.50% | 19.70% | 20.10% | 19.90% |
| Max of ink absorption（g/㎡） | 29.9 | 30 | 31.2 | 31.4 | 31.3 | 31 |
| Continual printing ability (2m nylon on LQ300 printer for 1.5million Character) | OK | OK | OK | OK | OK | OK |
| Performance Of ink release ( 2m nylon on LQ300 printer for 1.5million character) | OK | OK | OK | OK | OK | OK |
| printer ability of mobius | 10 | 9.6 | 9.5 | 9.7 | 9.8 | 9.6 |
| Scores | 9.8 | 9.5 | 9.6 | 9.8 | 9.9 | 9.7 |
| Advice: | ||||||
| 4040 HD 4.5mil：fit for Normal dot matrix printer and English typewriter(24PIN) | ||||||
| 4040 ND 4 mil： fit for nine line dot matrix printer and English typewriter(9PIN) | ||||||
| 4070 ND 5 mil: fit for high speed dot matrix printer | ||||||
Nylon66 yarn material making and inspection
Appearance, edge of ribbon two side , thickness ,weight, width etc..
Before inking Arefaction (using dehumidifiers 24 hours per day)
Inked ribbon quality control
- Using ink which imported from USA
- INK TECHNOLOGY CORP
- Ink model:
6790(black), 1302(purple)
- Ink machine :
- Use air compression to adjustink percentage
- Do Weight test to control inkpercentage
ABS cartridge quality control
- Mould making : using high class material to make cartridge mould , before mould producing cartridge , testing first ,if printer test OK , then start producing
- Mould maintain: take care of the mould ,check every month ,if any problem, solve problem at first
- Using high class ABS material to make cartridge , make the cartridge strong and hard
ABS cartridge department and mould department
FINISHED RIBBON QUALITY CONTROL
- Assemble : strictly according to assemble drawing
- Quality checking during finish ribbon making
- Testing before goods ship out
Assemble
Quality checking during ribbon making
Quality Checking before delivery
Quality Checking before delivery
